Pembekalan Dasar K3 dan 6S di SMK Pratama Gunung Putri, Bogor, Jawa Barat
Main Article Content
Abstract
Dalam hal keselamatan kerja tidak membedakan faktor umur, jenis kelamin, status, jabatan, semua manusia bisa mengalami kecelakaan kerja jika tidak mengikuti peraturan yang telah diterapkan oleh instansi. Oleh karenanya tujuan dari program PKM ini adalah memberikan pendampingan dasar implementasi terkait aspek K3 maupun 6S, agar mereka memiliki bekal dasar mengenai teori K3, jenis-jenis potensi bahaya ditempat kerja dan pentingnya peranan 5S+1S sebagai dasar pondasi program improvement lainnya dan kaitannya dengan unsur safety dalam bekerja, pemahaman dasar ini penting sebagai pembekalan sebelum mereka berkecimpung dalam dunia kerja. Metode dalam pengabdian ini melalui kuliah dan diskusi tatap muka di sekolah SMK Pratama-Gunung Putri-Bogor, Jawa Barat. Diharapkan dapat menggugah kesadaran siswa/i dan menjadi budaya positif dan bisa mengaplikasikan pengetahuan tersebut disetiap kegiatan sehari-hari
Article Details

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
References
Ariyani, R., Suarantalla, R., & Mashabai, I. (2021). JITSA JurnalIndustri&TeknologiSamawa. 2(1).
Asih, T. N., Mahbubah, N. A., & Fathoni, M. Z. (2020). Identifikasi Bahaya Dan Penilaian Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Prose Fabrikasi Dengan Menggunakan Metode HIRARC (Studi Kasus : PT. RAVANA JAYA). JUSTI (Jurnal Sistem Dan Teknik Industri), 1(1), 272–303.
Bastuti, S. (2021). Analisis Tingkat Risiko Bahaya K3 pada Pengelolaan Apartemen Menggunakan Metode Hazard Operability Study (HAZOPS). Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 7–14. https://doi.org/10.30656/intech.v7i1.2664
Díaz-Reza, J. R., García-Alcaraz, J. L., & Martínez-Loya, V. (2019). Impact Analysis of Total Productive Maintenance. In Impact Analysis of Total Productive Maintenance. https://doi.org/10.1007/978-3-030-01725-5
E.g, E., Diah, Y. M., & Zen, K. M. (2018). JEMBATAN – Jurnal Ilmiah Manajemen Bisnis Dan Terapan Tahun XIV No 2, Oktober 2017 | 103 PENGARUH KESELAMATAN DAN KESEHATAN KERJA TERHADAP KINERJA KARYAWAN PT. PERTAMINA EP ASSET 2 PRABUMULIH. Jembatan, 14(2), 103–118. https://doi.org/10.29259/jmbt.v14i2.5296
Hamdy, M. I. (2016). Analisa Potensi Bahaya dan Upaya Pengendalian Kecelakaan Kerja Pada Proses Penambangan Batu Adesit di PT. Dempo Bangun Mitra. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 2(2), 150. https://doi.org/10.24014/jti.v2i2.5101
Irmawati, I., Kresnowati, L., Susanto, E., & Nurfalah, T. I. (2019). Kesehatan Dan Keselamatan Kerja (K3) Di Bagian Filing. Jurnal Manajemen Informasi Kesehatan Indonesia, 7(1), 38. https://doi.org/10.33560/jmiki.v7i1.215
Jeffrey K. Liker and Gary L. Convis. (2012). TOYOTA. Mc Graw Hill.
Kumala, C. M., & Ramdhan, D. H. (n.d.). Hubungan Antara Iklim Keselamatan dengan Perilaku Keselamatan pada Pekerja Proyek PLN PUSMAPRO PST JATENG I.
Kusuma, Y. A., & Muttaqin, A. Z. (2019). Pendampingan Serta Edukasi Kedisiplinan Pengunaan Alat Pelindung Diri ( APD ) di SMK XYZ Madiun. 2(1), 22–28.
MA Pahmi, H. (2020). Implementasi 5R Sebagai Inisiatif Pondasi Improvement Awal Pada Perusahaan Pengolahan Pasir Silika. JENIUS : Jurnal Terapan Teknik Industri, 1(1), 38–46. https://doi.org/10.37373/jenius.v1i1.21
Martalina, S., Yetti, H., & Lestari, Y. (2018). Identifikasi Bahaya dan Risiko Keselamatan Kerja Pada Saat Overhaul di Area Kiln PT. X tahun 2017. Jurnal Kesehatan Andalas, 7(1), 14. https://doi.org/10.25077/jka.v7i1.774
Maulana, V. (2020). Pengaruh keselamatan dan kesehatan kerja (k3) terhadap kinerja petugas. J A, 17(2), 270–277.
Mayatra, M., Chauhan, N. D., & Trivedi, P. (2015). A literature review on implementation of Lean Manufacturing Techniques. International Journal of Advance Research, Ideas and Innovations in Technology, 1(4), 4–10.
Muhammad, H. A., Herlina, L., & Kurniawan, B. (n.d.). Identifikasi Dan Reduksi Waste Pada Proses Produksi Job Shop Dengan Pendekatan Lean Menufacturing ( Studi Kasus : PT . Barata Indonesia UUM Cilegon ).
Ningsih, S. O. D., & Hati, S. W. (2019). Analisis Resiko Keselamatan Dan Kesehatan Kerja (K3) Dengan Menggunakan Metode Hazard and Operability Study (Hazop) Pada Bagian Hydrotest Manual Di Pt. Cladtek Bi Metal Manufacturing. Journal of Applied Business Administration, 3(1), 29–39. https://doi.org/10.30871/jaba.v3i1.1288
Ningsih, W., & Ferijani, A. (2020). Deskripsi Pelaksanaan Kesehatan Dan Keselamatan Kerja (K3) Di Perusahaan Panca Jaya. Jemap, 2(2), 267. https://doi.org/10.24167/jemap.v2i2.2458
Nissa, U. N., & Amalia, S. (2018). Pengaruh Keselamatan dan Kesehatan Kerja Terhadap Kinerja Karyawan. Jurnal Riset Bisnis Dan Investasi, 3(3), 69. https://doi.org/10.35697/jrbi.v3i3.946
Pogalan, S. M. K. N., & Dapur, D. (2019). Penerapan Materi Kesehatan Dan Keselamatan Kerja Terhadap Sikap Dan Penguasaan Siswa Di Dapur. 16(2).
Shah, D., & Patel, P. (2018). Productivity Improvement by Implementing Lean Manufacturing Tools In Manufacturing Industry. International Research Journal of Engineering and Technology, 5(3), 3794–3798.
Syafrial, H., & Ardiansyah, A. (2020). Prosedur Keselamatan Dan Kesehatan Kerja (K3) Pada PT. Satunol Mikrosistem Jakarta. Abiwara : Jurnal Vokasi Administrasi Bisnis, 1(2), 60–70. https://doi.org/10.31334/abiwara.v1i2.794
UU RI Nomor 1. (1970). Undang-